WA1200 outdoor bidirectional AGC trunk amplifier is a new high gain amplifier. Adopt mature and optimized circuit design, scientific and rational internal process, high quality materials, and built-in high performance AGC control circuit, to ensure the stable gain and low distortion. It's the first choice equipment for large and medium-sized CATV bidirectional transmission network.
* RF AGC control for forward path.
* Plug-in equalizer and attenuator.
* GaAs power double output.
* Two-way splitter or tap output.
* 5 ~1003MHz, Frequency division optional.
* Downstream Gain≥ 38 dB.
* RF AGC range: ±4dB( input) /±0.5dB( output) .
* Upstream Gain≥ 22 dB.
* Power Consumption≤ 22W.
* Operating Temperature: -20℃ ~ +55℃ .
* Operating Voltage: AC220V or AC60V( 50Hz).
* Dimension: 260mm(L)X 200mm(W)X 130mm(H).
Item |
Unit |
Technical Parameter |
||||
Forward Path |
||||||
Frequency range |
MHz |
54/85 ~860/1003 |
||||
Rated gain (@FZ110) |
dB |
30 |
34 |
36 |
38 |
|
Min full gain (@FZ110) |
dB |
≥30 |
≥34 |
≥36 |
≥38 |
|
Rated Input Level |
dBμV |
72 |
||||
Rated Output Level |
dBμV |
106/108 |
||||
Flatness In Band |
dB |
±0.75 |
||||
Noise Figure |
dB |
≤ 10 |
||||
Return Loss |
dB |
≥ 16 |
||||
ATT |
dB |
1-18 (Fixed, 1dB stepping, selectable) |
||||
EQ |
dB |
1-15 (Fixed, 1dB stepping, selectable) |
||||
C/CTB |
dB |
≥69 |
Test condition: 79 channels. Output level: 53MHz/550MHz/750MHz. 99dBμV /105dBμV /108dBμV |
|||
C/CSO |
dB |
≥67 |
||||
AGC Pilot Frequency |
MHz |
168.25 (or specified by the user) |
||||
AGC Characteristic |
dB |
±4 (input) /±0.5 (output) |
||||
Group Delay |
ns |
≤ 10 (112.25 MHz/116.68 MHz) |
||||
Signal to Hum Ratio |
% |
< 2 |
||||
Gain Stability |
dB |
-1.0 ~ +1.0 |
Return Path |
||||||
Frequency Range |
MHz |
5 ~ 42/65 |
||||
Rated Gain (@FZ110) |
dB |
12 |
16 |
20 |
24 |
|
Max Output Level |
dBμV |
≥ 110 |
||||
Flatness In Band |
dB |
±0.75 |
||||
Noise Figure |
dB |
≤ 12 |
||||
Return Loss |
dB |
≥ 16 |
||||
Carrier to Second Order Intermodulation Ratio |
dB |
≥ 52 |
Test condition: output level 110dBμV, Test points: f1=10MHz, f2=60MHz, f3=f2-f1=50MHz |
|||
Group Delay |
ns |
≤ 20 (57MHz/59MHz) |
||||
Signal to Hum Ratio |
% |
< 2 |
||||
General Characteristic |
||||||
Characteristic Impedance |
Ω |
75 |
||||
Test Port |
dB |
-20±1 |
||||
Power Voltage |
V |
A: AC (135 ~ 250)V; B: AC (35 ~ 90)V |
||||
Impulse Withstand Voltage (10/700μs) |
kV |
> 5 |
||||
Power Consumption |
W |
22 |
||||
Dimension |
mm |
260(L)╳ 200(W)╳ 130(H) |